Project EV APEX-22S 22kW Untethered EV Charger
The Project EV APEX-22S 22kW Untethered EV Charger is a powerful three-phase smart EV charging solution designed for homes, workplaces and commercial installations requiring faster AC charging.
Delivering up to 22kW of charging power through a convenient Type 2 socket, the untethered APEX-22S allows the vehicle's own compatible charging cable to be connected when required, leaving the charger with a clean and uncluttered appearance when not in use.
Combining smart app control, solar compatibility, intelligent dynamic load balancing and comprehensive built-in electrical protection, the APEX-22S provides installers and EV owners with a highly capable charging solution for modern electric vehicles.
Fast 22kW Three-Phase EV Charging
The Project EV APEX-22S operates from a 400V three-phase supply, with a maximum current of 32A and rated charging power of 22kW.
For suitable vehicles and electrical installations, this provides considerably greater AC charging capability than a standard 7kW single-phase home charger, making the APEX-22S particularly well suited to commercial premises, workplaces and properties with an appropriate three-phase electrical supply.
Untethered Type 2 Socket
Rather than having a permanently attached charging lead, the APEX-22S features a Type 2 charging socket.
This provides greater flexibility for users who prefer to use and store their own charging cable and gives the charger a clean appearance when the vehicle isn't connected.
Built-In PEN Fault Protection
The APEX range features Pro Earth PEN fault protection as standard, removing the requirement for an earth spike in applicable installations and helping simplify the installation process.
The charger also incorporates a comprehensive range of electrical protection features designed to provide safe and dependable EV charging.
Comprehensive Electrical Protection
Protection features include:
Pro Earth PEN fault protection
AC 30mA / DC 6mA residual current detection
Over-current protection
Residual current protection
Surge protection
Over-voltage protection
Under-voltage protection
Over-temperature protection
Under-temperature protection
Intelligent Dynamic Load Balancing
Built-in dynamic load balancing allows the APEX EV charger to intelligently adjust the amount of power it draws according to the electrical demand of the property.
This helps prevent the charger from drawing excessive power while allowing it to operate at an appropriate optimum charging rate when capacity is available.
Solar Compatible EV Charging
The Project EV APEX is solar compatible, allowing compatible installations to make use of locally generated solar energy for electric vehicle charging.
For properties already fitted with solar PV, or where solar is planned for the future, this provides an opportunity to make greater use of renewable energy generated on site.
Smart APEX App Control
The Project EV APEX-22S can be controlled using the APEX Smart App, giving users convenient control and monitoring from a compatible smartphone.
The app allows users to:
Start and stop EV charging
Monitor charging activity
Prioritise off-peak charging
Manage multiple charge points from a single master account
Wi-Fi & Bluetooth Connectivity
The APEX-22S features Wi-Fi and Bluetooth connectivity for smart communication and control.
The standard APEX-22S does not include 4G connectivity. Customers requiring 4G should select the APEX-22S-4G model.
The charger also supports OCPP 1.6 JSON, with OCPP 2.0.1 available as an optional specification.
Flexible Plug & Play, RFID or App Operation
Charging can be started and controlled using several methods to suit different installations and users.
The APEX-22S supports:
Plug & Play
RFID card
APEX App
An integrated Mifare ISO/IEC 14443 A RFID reader makes the charger suitable for installations where controlled user access is required.
Designed for Indoor & Outdoor Installation
With an IP65 enclosure rating and IK08 impact protection, the APEX-22S is designed for robust everyday EV charging installations.
The Type 2 socket itself is rated IP54.
The charger can be wall mounted or post mounted, providing flexibility for domestic driveways, workplace car parks and other commercial EV charging locations.
Operating temperatures range from -30°C to +50°C, helping provide dependable performance throughout typical UK weather conditions.
Compact & Contemporary Design
Despite its powerful 22kW output, the untethered APEX-22S has compact dimensions of just:
320mm × 190mm × 144mm
with a product weight of approximately:
2.4kg
Its contemporary enclosure and circular charging socket give the APEX range a distinctive appearance suitable for both residential and commercial properties.
Key Features
22kW fast AC EV charger
Untethered Type 2 socket
Three-phase 400V AC operation
Maximum current: 32A
Pro Earth PEN fault protection
Intelligent dynamic load balancing
Solar compatible
Wi-Fi connectivity
Bluetooth connectivity
APEX Smart App control
Plug & Play charging
RFID card operation
Mifare ISO/IEC 14443 A RFID reader
OCPP 1.6 JSON support
Optional OCPP 2.0.1
AC 30mA / DC 6mA residual current detection
Built-in over-current protection
Surge protection
Over and under-voltage protection
Over and under-temperature protection
IP65 enclosure
IP54 charging socket
IK08 impact protection
Wall or post mounting
Operating temperature from -30°C to +50°C
CE and UKCA certified
5-year warranty, subject to Project EV terms and conditions
Technical Specifications
| Specification | Project EV APEX-22S |
|---|---|
| Charger Type | Untethered |
| Rated Power | 22kW |
| Connector | Type 2 Socket |
| Input | 3P + N + PE |
| Voltage | 400Vac ±20% |
| Maximum Current | 32A |
| Frequency | 50/60Hz |
| Start Modes | Plug & Play / RFID Card / App |
| RFID | Mifare ISO/IEC 14443 A |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| LAN | No |
| 4G | No – APEX-22S-4G required |
| OCPP | OCPP 1.6 JSON |
| OCPP 2.0.1 | Optional |
| Dynamic Load Balancing | Yes |
| Solar Compatible | Yes |
| PEN Fault Protection | Yes |
| Residual Current Detection | AC 30mA / DC 6mA |
| IP Rating | IP65 |
| Socket Rating | IP54 |
| IK Rating | IK08 |
| Mounting | Wall / Optional Post |
| Operating Temperature | -30°C to +50°C |
| Operating Humidity | 5%–95%, non-condensing |
| Maximum Operating Altitude | ≤2000m |
| Dimensions | 320 × 190 × 144mm |
| Weight | 2.4kg |
| Certification | CE / UKCA |
| Certification Standards | EN/IEC 61851-1:2019, EN/IEC 61851-21-2:2021 |
| Warranty | 5 Years* |
*Project EV's five-year APEX warranty is subject to terms and conditions. The product must be installed in accordance with applicable local regulations.
Why Choose the Project EV APEX-22S?
The Project EV APEX-22S combines the performance of 22kW three-phase charging with the flexibility of an untethered Type 2 connection and an extensive range of smart charging features.
With solar compatibility, intelligent dynamic load balancing, Wi-Fi and Bluetooth connectivity, RFID access, app control and built-in PEN fault protection, it provides a comprehensive solution for both private and commercial EV charging installations.
Its compact design, IP65 protection and optional post mounting also make it suitable for everything from residential driveways to workplace and commercial car parks where reliable, controllable 22kW EV charging is required.
Any orders below £75 subject to £6.00 carriage
- Stock: 2-3 Days
- Model: PROEVAPEX-22S
- SKU: PROEVAPEX-22S
- MPN: APEX-22S
